Cobra Electronics Marine Radio COBRAMARINE User Manual

3.0

Out of 1 Ratings

Owner's of the Cobra Electronics Marine Radio COBRAMARINE gave it a score of 3.0 out of 5. Here's how the scores stacked up:

  • Reliability

    3.0 out of 5

  • Durability

    3.0 out of 5

  • Maintenance

    3.0 out of 5

  • Performance

    3.0 out of 5

  • Ease of Use

    3.0 out of 5
of 45
 
Introduction
Nothing Comes Close to a Cobra
®
Product Features
41
Advanced Operation
Advanced Operation
•
There are several features in the CobraMarine MR F80 VHF
radio that provide quick access to the voice calling channels
and allow monitoring more than one (1) channel at a time.
Channel 16/9
This function provides quick access to calling Channel 16 or
Channel 9 from any operational mode.
To Switch to Channel 16 or Channel 9:
1. Press the Channel 16/9 button to change to Channel 16.
2. Press the Channel 16/9 button again to change to
Channel 9.
3. Press the Channel 16/9 key again to go back to the
original working channel.
When on Channel 16 or Channel 9 in the Channel 16/9 mode,
turn the Channel Knob, press the Channel Up/Down button
on the microphone or press the Function (F1/F2) button to
change to other channels.
Operating Your Radio
40
English
Product Features
Introduction
NOAA All Hazards/Weather
Radio and Alert, w/SAME
NOTE
The Weather channels may be turned Off, while
the SAME area code alerts are On or any combination
of On or Off.
5. Turn the Channel knob to select EDIT. Press Enter
button.
6. Turn the Channel knob or press the Function (F1, F2)
buttons on the radio to select the SAME alert code
number (1-10) you wish to program.
7. Press the Enter button to start entering the SAME code
number. First number entry location will start to blink.
8. Turn the Channel knob or press the Channel Up/Down
buttons on the microphone to enter the six (6) digit
SAME code number you want to enter.
9. Use the Function (F1, F2) buttons on the radio to move
to the next or previous number. Repeat steps 7 and 8
until all six digits have been entered.
10. Press the Enter button to complete the code entry.
11. Move the selection arrow to NEXT to set another SAME
alert channel. If desired. Ten total codes can be
programmed.
12. When the changes are complete, exit the WX/SAME
menu and return to the Setup menu.
Operating Your Radio
SAME Codes and Edit List
SAME Event Code Alert
Channel 16/9 Toggle
Channel 16/9 Button
Microphone 16/9 Button
MRF80BD_MANL_OPER:F75-Operation-8 12/9/10 10:35 AM Page 40

   Find Your Products By Category