Alesis Drums DM10 User Manual

0

Out of 0 Ratings

Owner's of the Alesis Drums DM10 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 52
 
27
HI-HAT CALIBRATION
The first time you connect a hi-hat pedal to the DM10 module, we
recommend calibrating it so the module can "read" the pedal's
movement optimally. If you use the same hi-hat each session (even if
you have disconnected and reconnected it), then you shouldn't need to
calibrate each time as long as you store your trigger settings after
calibrating (see STORING TRIGGER SETTINGS in the STORING &
COPYING chapter for more information). However, anytime you connect a different hi-hat from the
previously connected one, you should calibrate it.
To calibrate the hi-hat pedal:
1. Connect the hi-hat pedal to the module but do not press it down.
2. On the module, press EXT TRIG.
3. You will see a page with items including "Sensitvty" and "Function."
Use the CURSOR UP / DOWN buttons to highlight the "Input" field at
the top of the screen then use the VALUE UP / DOWN buttons to
select "HiHat."
4. Press CAL (F4).
5. With the hi-hat pedal completely raised ("open"), press CAL OPEN
(F1 or F2) and wait for a message saying the process is complete.
6. With the hi-hat pedal completely pressed ("closed"), press CAL
CLSED (F3 or F4) and wait for a message saying the process is
complete.
7. Press EXIT to exit the calibration page (or press DRUM KIT to return to the main screen).
STORING EXT. TRIG SETTINGS
Any changes you make to the parameters in the Ext. Trig Menu will remain for the current session but will
return to their defaults if you turn off the module. We recommend storing your settings when you change
them so you can use them in future sessions.
To store Ext. Trig settings:
1. Be sure you are in the Ext. Trig Menu by pressing EXT TRIG.
2. Press STORE.
3. A window will appear asking you to confirm your choice. Press
CANCEL (F2 or F3) to cancel storing your Ext. Trig settings. Press
YES (F1) to store them.
EXPLORING OPTIMAL SENSITIVITY AND THRESHOLD SETTINGS
We created the DM10 module's default settings to allow for great playability right out of the box, but we
recommend experimenting with different triggers settings – particularly sensitivity and threshold – so you can
find the settings that best suit your playing style. Here is one recommended way to explore these settings:
1. Press EXT. TRIG to access the trigger settings.
2. Make sure NOTE CHASE is activated (the LED should be lit).
3. Strike a trigger on your electronic drum kit whose settings you want to adjust. The name of the trigger
will be displayed at the top of the module's LCD.
4. On the INP page, adjust the "Sensitvty" setting to an appropriate level as you strike the trigger with
moderate force, typical of how you play. The resulting sound should be neither too loud nor too quiet.
(Make sure the "Function" setting is set to "TRIGGER.") If the level meter in the upper-right hand
corner is "clipping" or maxing out too soon, reduce the sensitivity.
5. On the TRIG page, adjust the "Threshold" setting to an appropriate level as you strike the trigger as
lightly
as you would while playing. You can use the level meter in the upper right-hand corner of the
module's LCD to see whether the module is detecting your hits.
6. After setting the threshold, return to the INP page and readjust the "Sensitvty" setting as you strike the
trigger with varying force.
7. Repeat this process for other triggers in your electronic drum kit.
8. Press STORE to save these changes.
Note that you can also adjust the velocity curve for each trigger, which can help in the "shaping" of the
triggers' volume levels relative to the range of force you use while playing.
Also, the Utility Menu allows you to set the rough "global" sensitivity of all triggers in the Kit. ("Trig Sens")
See the UTILITY MENU chapter for more information.
Note: The module's HI-HAT
CONTROL TRIGGER INPUT
does not support keyboard-style
expression pedals.

   Find Your Products By Category