Humminbird Marine GPS System Di Combo User Manual

0

Out of 0 Ratings

Owner's of the Humminbird Marine GPS System Di Combo gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 179
 
121
Digital Depth Source
(Advanced, DownImaging™ models with optional-
purchase transducers only [386ci DI])
Settings: Auto, 2D Element; Default = Auto
Digital Depth Source specifies the beams that will be used to provide the
depth for the digital depth readouts (see Views and Setup Menu Tab: Select
Readouts for more information). It is important to set this menu option based
on the transducer that is connected to the control head, as follows:
• If a Down Imaging™ transducer is connected to the control head,
select Auto. Depending on the depth, Auto will automatically choose
the 2D conical beams or the Down Imaging™ beams to display depth in
the digital readout window. Auto is the default setting.
• If an accessory transducer is connected to the control head, select 2D
Element. For example, if you connect an ice transducer to your Down
Imaging™ unit, change the digital depth source to 2D Element in order
to display depth in the digital readout window. The 2D Element setting
should not be used with a Down Imaging™ transducer.
NOTE: Visit our Web site at humminbird.com to determine which accessory
transducers are compatible with your Humminbird® Fishfinder, or contact our
Customer ResourceCenter.
NOTE: When Digital Depth Source is set to 2D Element, the DI Only setting will
be removed from the DIPings menu. When DI Pings is set to DI Only, the 2D
Element setting will be removed from the Digital Depth Source menu. See DI
Pings for more information.
Sonar MenuTab

   Find Your Products By Category