APC Home Security System NetBotz User Manual

0

Out of 0 Ratings

Owner's of the APC Home Security System NetBotz gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 152
 
54NetBotz Appliance User’s Guide
Output control external port settings
Select a device from the Output Control Configuration window and click External Ports. To modify
devices connected to your output control devices:
1. Select the output control action to assign to the corresponding port from Relay Output Type.
Note: Output control actions do not apply for devices wired between the NO and NC
terminals. These devices have an always open state.
The following output control actions are available when the output control device is wired
between the NO (Normally Open) and COM terminals on the appliance:
Action Description
None No output action is associated with this port.
One-Second Button
(NC)
When activated, a normally closed (NC) relay is switched to an
open state for 1 second, and then switched back to closed.
One-Second Button
(NO)
When activated, a normally open (NO) relay is switched to a
closed state for 1 second, and then switched back to open.
Switch (NC) When activated, a normally closed (NC) relay is switched to an
open state.
Switch (NO) When activated, a normally open (NO) relay is switched to a
closed state.
Ten-Second Button
(NC)
When activated, a normally closed (NC) relay is switched to an
open state for 10 seconds, and then switched back to closed.
Ten-Second Button
(NO)
When activated, a normally open (NO) relay is switched to a
closed state for 10 seconds, and then switched back to open.
Reboot Button When activated, power to the outlet is interrupted for 10 seconds,
and then restored.

   Find Your Products By Category