Humminbird Fish Finder 408710-1 User Manual

0

Out of 0 Ratings

Owner's of the Humminbird Fish Finder 408710-1 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 160
 
110
Sonar Menu Tab
Fish ID+™
Settings: Off, On; Default = Off
Fish ID+™ uses advanced signal processing to interpret sonar returns and
will display a Fish Symbol when very selective requirements are met. When
a fish is detected, a fish icon and its depth are displayed above the return
that has been classified as being a fish. Three different fish size icons
represent the intensity of the sonar return and provide an indicator of
relative fish size.
DualBeam PLUS™ sonar models represent targets detected in the 200 kHz
narrow beam as Orange Fish Symbols and targets detected in the 83 kHz
wide beam as Blue Fish Symbols.
When Fish ID+™ is turned off, the Fishfinder shows only the raw sonar
returns on the display. These returns will often result in “arches“ forming on
the display, indicating potential targets. Due to the transducer beam angle,
the distance to a fish decreases as the fish moves into the beam, and then
increases as it moves out again, creating a Fish Arch when this distance
change is shown on the display. Boat speed, chart speed, and the position
of the fish within the sonar beam greatly affect the shape of the arch.
Fish ID Sensitivity
Settings: Low = 1, High = 10; Default = 5
Fish ID Sensitivity adjusts the threshold of the Fish ID+™ detection
algorithms. Selecting a higher setting allows weaker returns to be displayed
as fish. This is useful for identifying smaller fish species or baitfish. Selecting
a lower setting displays fewer fish from weak sonar returns. This is helpful
when seeking larger species of fish.
Fish ID Sensitivity is used in conjunction with Fish ID+™. Fish ID+™ must be
On for Fish ID Sensitivity to affect the ability of the Fishfinder to identify
sonar returns as fish.
200 kHz, narrow beam
orange fish symbols
83 kHz, wide beam blue fish symbols
Transducer Cone and Fish Arches

   Find Your Products By Category