Bushnell Hunting Equipment 201966 User Manual

0

Out of 0 Ratings

Owner's of the Bushnell Hunting Equipment 201966 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 74
 
12
13
In Distance) indicator will turn on and the current Sight-In Distance number will blink within the display (I.e.
1
,
1
, , or ). e Sight-In Distance options can be cycled through in a circular fashion by pressing and releasing
the mode button. Once the desired Sight-In Distance is displayed, select it by pressing and releasing the power button.
. And nally, if RIFLE mode was chosen, and as long as unit of measure and a sight-in distance was selected, you have the
option of determining how you would like hold-over / bullet-drop displayed. If measurement units are in yards, you will be
able to choose between inches, MOA, or ML (mil). If measurement units are in meters, you will be able to choose between
centimeters, MOA, or ML (mil). For example, the “CM” for centimeters or “IN” for inches will ash in the display and the
SETUP icon is still lit. Once the desired ballistic measure is displayed, select it by pressing and releasing the power button.
Upon returning to the normal operating menu, the current compensation mode and unit of measure will be identied
in the display as indicated below.
SETUP MENU NORMAL OPERATING MENU
When the unit automatically powers down, operation will always return to the normal operation (i.e. away
from SETUP) with the last used ARC™ mode active (i.e. BOW, RIFLE, or REGULAR) along with the last used
TARGETING modes active (Standard SCAN, BULLSEYE, or BRUSH). If the unit turns o while in the SETUP
menu, the unit will always return to the last mode(s) still active.
lowest intensity while “BRT” is the brightest. Simply press the MODE button until the desired brightness setting is
displayed and select by pressing and releasing the POWER button.
ere are two ARC™ (Angle Range Compensation) modes and one REGULAR mode. e two ARC™ modes are
BOW mode ( ) and RIFLE mode ( ).
To select between these modes, rst turn the unit “ON” by pressing and releasing the POWER button. Next, press and
hold the MODE button for three seconds to get into the SETUP menu. e brightness is displayed rst and can be
changed by pressing the MODE button or accepted by pressing the POWER button. en press the power button until
you see the existing compensation mode indicated by either the “Bow” symbol ( ), the “Rie” symbol ( ) lit with
one of the ballistic groups (A thru J) displayed and ashing, or no indicators lit and the message (
) ashing.
e modes can be cycled through in a circular fashion by pressing and releasing the mode button. e order of modes is
a follows: BOW, RIFLE A, RIFLE B, RIFLE C, RIFLE D, RIFLE E, RIFLE F, RIFLE G, RIFLE H, RIFLE I, RIFLE
J, REG, etc. When the bow selection is displayed, (
) will ash and when the rie selection is displayed, ( )
and ballistic group will be ashing. When the (
) is displayed, the message ( ) will ash within the display.
Once the desired distance compensation mode is displayed, select it by pressing and releasing the POWER
button. Following this selection, the current unit of measure, “Y” for yards or “M” for meters will ash
in the display and the SETUP icon is still lit. Pressing the MODE button will toggle the unit of measure.
When the desired unit of measure is displayed, press the POWER button to accept the unit of measure.
If the user chooses RIFLE mode, and after having determined unit of measure, the user has the following options:
1
. Variable Sight-In (VSI™) - Allows the rie hunter to choose from four sight-in distances (
1
,
1
, , or  yards
or meters) and provides holdover / bullet-drop data in inches, centimeters, MOA, or ML (mil). e “SD” (Sight-
SETUP Menu Normal Operating Menu

   Find Your Products By Category