Bushnell GPS Receiver Bushnell GPS Receiver User Manual

0

Out of 0 Ratings

Owner's of the Bushnell GPS Receiver Bushnell GPS Receiver gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 64
 
5
BASIC SETUP
• Openbatterycoverandinsert3AAAbatteries(Fig 1,
pg 4).Recordtheserial#inside-you’llneeditlaterto
registeryourD-Touronline.Closethecover.
• Go outdoors. HOLD POWER(1) (keep the button
pressed) until the display comes on. Wait for GPS
satellitelock(iconstopsblinking)(11).Thismaytake
afewminutesafterthefirstpower-upinanewarea.
• PressSETUP(4).PressMARK(2),thenpresstheTRIP
(3) or SETUP button to set theHour for yourarea
(Fig. 2).
• Press MARK to return to the Setup screen. To set
clock,distanceortemperatureunits(changeto24hr,
meters,C)pressSETUPtoselect,thenpressMARKto
togglebetweensettings(Fig. 3).PressPOWERtoexit
Setupscreen.
MARKING/RETURNING to a LOCATION
• PressPOWERtoselectoneoffiveLocationicons(6)
(Home,Car,Star,Flag,Target).Whilestandingatthe
Locationyouwanttomark,HOLDMARKtosaveits
position in the D-Tour’s memory (the display will
change as shown) (Fig. 4). You can now turn the
poweroff(HOLDPOWER)andleavethelocation.
• Toreturntothelocationyoumarked,turntheD-Tour
on.Makesurethesameiconyouusedtomarkthe
locationisshown(ifnot,pressPOWERtoselectit).
Thedisplayindicatesthedirectionanddistanceback
tothelocation(Fig. 5).Moveinthedirectionofthe
arrow,watchingforthedistancetodecrease.When
youreachthelocation,the“Mark”iconwillflashinthe
centerofthedisplay.
Fig. 2
Fig. 3
Fig. 4
Fig. 5

   Find Your Products By Category