Out of 8 Ratings

Owner's of the Brother All in One Printer MFC-8220 gave it a score of 4.1 out of 5. Here's how the scores stacked up:
  • Reliability

    4.0 out of 5
  • Durability

    4.14 out of 5
  • Maintenance

    4.12 out of 5
  • Performance

    4.0 out of 5
  • Ease of Use

    4.0 out of 5
of 203
White Spots on black text
and graphics at 94 mm
Black Spots at 94 mm
If the problem is not solved after printing a few pages, the drum unit may
have glue from label stock on the OPC drum surface.
Clean the drum unit as follows:
1 Position the print sample in front of the drum unit, and find the exact
position of the poor print.
2 Turn the drum unit gear by hand while looking at the surface of the
OPC drum.
Do not touch the photosensitive drum with your fingers.
3 When you have located the mark on the drum that matches the print
sample, wipe the surface of the OPC drum with a cotton swab until
the dust or paper powder on the surface comes off.
Do not try to clean the surface of the photosensitive drum with a
sharp object. (e.g. ball-point pen, paper clip etc.)
The drum unit may be damaged. Put in a new drum unit. (See Replacing
the drum unit on page 12-30.)
Examples of poor print
94 mm
94 mm
94 mm
94 mm
Photosensitive drum