Alesis Electronic Keyboard Alesis Electronic Keyboard User Manual

0

Out of 0 Ratings

Owner's of the Alesis Electronic Keyboard Alesis Electronic Keyboard gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 20
 
3
INTRODUCTION
This Quickstart Guide is intended to give you a brief overview of the functionality and features of the Q49. In
this manual you will find instructions on how to connect the Q49 and how to use its basic features. Enjoy!
CONNECTION DIAGRAM
Please refer to the following scenario for connecting the Q49.
1. Connect a USB cable from your computer to the Q49. The
unit will be powered through the USB connection.
Alternatively, if you do not wish to use a computer in your
setup or if you wish to power the Q49 externally, please
plug in a 9V DC, 500mA power adapter, center-positive.
2. If you would like to use an external sound module, connect
a 5-pin MIDI cable from the KEYBOARD MIDI OUT of the
Q49 to the MIDI IN of the external device.
REAR PANEL OVERVIEW
1. DC POWER ADAPTER INPUT – Plug in a
9V DC, 500mA power adapter, center-
positive (not included) if you do not wish to
power the Q49 through the USB connection.
2. USB CONNECTION – Plug a standard USB
cable into this outlet and into the USB port of
your computer. The computer's USB port will
provide power to the Q49. This connection is used to send and receive MIDI data to and from your
computer and may also be used to send MIDI data from your computer to a device attached to the MIDI
OUT port of the Q49.
3. MIDI OUT – Use a five-pin MIDI cable to connect this jack to the MIDI IN of an external device.
4. SUSTAIN PEDAL INPUT – Connect a 1/4" TS sustain pedal to this input.
1
234
EXTERNAL SOUND MODULE
(not included)
COMPUTER
(not included)
POWER
(not included)
SUSTAIN
PEDAL
(not included)

   Find Your Products By Category