4.0

Out of 1 Ratings

Owner's of the Alesis Musical Instrument MICROVERB 4 gave it a score of 4.0 out of 5. Here's how the scores stacked up:
  • Reliability

    4.0 out of 5
  • Durability

    4.0 out of 5
  • Maintenance

    4.0 out of 5
  • Performance

    4.0 out of 5
  • Ease of Use

    4.0 out of 5
of 44
 
Chapter 2 – Connections
14 MicroVerb 4 Reference Manual
Although Alesis does not endorse any specific product, chemicals such as Tweek
and Cramolin, when applied to electrical connectors, are claimed to improve the
electrical contact between connectors.
Typical Applications
The analog audio inputs and outputs are typically used in one of three ways:
from one or two effect/aux send outputs of a mixer, and out to the effect return
inputs of the mixer; or,
from a line-level instrument (like a guitar or keyboard with either a mono or stereo
output), and out to an amplifier or mixer input; or,
from the stereo buss outputs of a mixer to a mix-down tape machine or amplifier.
When used with a mono source, the MicroVerb 4 is placed between the source and
the mixer/amplifier. Although the source may be mono, both the [LEFT/MONO] and
[RIGHT] outputs can be connected to the inputs of a mixer/amplifier if stereo
processing effects are desired. If using the effect sends of a mixer, you have the
advantage of sending any of the mixer’s input channels to the MicroVerb 4’s input(s),
and have control over the level of each channel being sent.
These applications are outlined and illustrated in detail on the following pages.
Input Jack Wiring
The MicroVerb 4’s [LEFT] INPUT jack is normalled to the [RIGHT] INPUT. This
means that if you only connect a single mono cable to the [LEFT] INPUT jack, it will
also be routed to the [RIGHT] INPUT. However, if anything is connected to the
[RIGHT] INPUT jack, this normalized connection will be broken; therefore the [LEFT]
INPUT jack feeds only the [LEFT] INPUT, and the [RIGHT] INPUT jack feeds only the
[RIGHT] INPUT. Also, the [RIGHT] INPUT jack is NOT normalled to the [LEFT]
INPUT.
LEFT/CH 1
RIGHT/CH 2
LEFT/CH 1
RIGHT/CH 2
Inputs Outputs
LEFT/CH 1
LEFT/CH 1
RIGHT/CH 2
Interfacing Directly with Instruments
J
When connecting audio cables and/or turning power on and off, make sure that all
devices in your system are turned off and the volume controls are turned down.
The MicroVerb 4 has two 1/4” unbalanced inputs and two 1/4” unbalanced outputs.
These provide three different audio hookup options: