0

Out of 0 Ratings

Owner's of the Humminbird Marine GPS System Di Combo gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 179
 
85
NOTE: Aminimum distanceof10feetwill bemaintainedbetweenthe Upper and
Lower Range regardless of the manualsettingsentered.
The available Lower Range settings are determined by your Humminbird® model
as follows:
386ci: Auto to 1500 ft, Auto to 457 m (International Models only);
Default = Auto
386ci DI: Auto to 1000 ft, Auto to 330 m (International Models only);
Default = Auto
Chart Speed
Settings: 1-9, Ultra, where 1 = Slow, 9 = Fast, Ultra =
Fastest; Default = 5
Chart Speed determines the speed at which the sonar information moves across
the display, and consequently the amount of detail shown.
A faster speed shows more information and is preferred by most anglers;
however, the sonar information moves across thedisplay quickly. A slower speed
keeps the information on the display longer, but the bottom and fish details
become compressed and may be difficult to interpret. Regardless of the Chart
Speed setting, the RTS Windowwill update at the maximum rate possible for
the depth conditions.
Reset XTE
(only when Navigating)
Settings: Press the RIGHT Cursor key to activate.
Reset XTE is available during navigation. When it is selected, the cross track
error (XTE) will be recalculated from the boat’s current position to the next
waypoint in the route.
For example, if you are fishing in 60 feet of water but are only interested in
the first 30 feet (surface to a depth of 30 feet), you should set the Lower
Depth Range limit to 30. The display will show the 0 to 30 foot range, which
allows you to see a more detailed view than you would see if the display
went all the way to the bottom.
Sonar X-Press™Menu