Cobra Electronics Marine Radio COBRAMARINE User Manual

3.0

Out of 1 Ratings

Owner's of the Cobra Electronics Marine Radio COBRAMARINE gave it a score of 3.0 out of 5. Here's how the scores stacked up:

  • Reliability

    3.0 out of 5

  • Durability

    3.0 out of 5

  • Maintenance

    3.0 out of 5

  • Performance

    3.0 out of 5

  • Ease of Use

    3.0 out of 5
of 45
 
Operation from the Microphone
Use the microphone to select operation modes and accomplish approximately 90%
of all radio functions. Microphone features include:
■
Instant Channel 16/9 button is used to access emergency channels.
■
Channel Up/Down button is used to change channels.
■
Push to Talk (PTT) button is used to send or record a radio message.
■
Function (F1/F2) button is used to toggle between preset channels and/or, when
in a menu, it acts as an Escape key.
■
Call/Setup and Enter button is used to enter the routine Digital Selective Calling
(DSC) menu and enter the setup menu for both advanced and basic setup
functions.
NOTE
The microphone and the transceiver radio meet the JIS7 waterproof
standards.
Introduction
Nothing Comes Close to a Cobra
®
Product Features
45
44
English
Product Features
Introduction
Advanced OperationAdvanced Operation
Scanning of Memory Channels
During Memory Scan mode, the radio rapidly switches from
one recorded channel to another. When any activity is
detected, the radio stops the scan for 10 seconds for brief
listening on that channel. The scan continues until the radio
is switched out of the Memory Scan mode.
NOTE
If there are fewer than two (2) channels recorded, the
Memory Scan mode is not available. (For instructions
on recording at least two channels, see Memory
Channels, page 55.)
NOTE
The radio must be squelched for the Memory Scan
mode to function. See page 38 for Squelch
procedure.
To Enter Memory Scan:
From Standby mode, press the Memory Scan button.
The radio immediately begins to scan the channels selected
and MEM SCAN (memory scan) shows on the LCD.
To Exit Memory Scan:
From Memory Scan mode, press the Memory Scan button.
The radio returns to Standby mode on the last scanned
memory location.
During Memory Scan When Receiving
an Incoming
Transmission:
1. Press the Memory Scan button to remain on that
memory location and end scanning. The radio returns to
Standby mode.
2. Press the Channel Up/Down microphone channel buttons
or turn the Channel knob to resume scanning.
If no button is pressed within 10 seconds, the radio
automatically resumes scanning.
During Memory Scan When Not Receiving
an Incoming
Transmission:
Press the Talk button to communicate on the last active
channel scanned and return to Standby mode.
Operating Your Radio
Operating Your Radio
Memory Scan/
Clear Button
Scanning
Memory Channel
Up
Button
Microphone
DSC and
Call/Setup
Enter Button
Down
Button
Push to
Talk
(PTT)
Button
Function
(F1/F2)
Button
Instant
Channel
16/9 Button
MRF80BD_MANL_OPER:F75-Operation-8 12/9/10 10:35 AM Page 44

   Find Your Products By Category