0

Out of 0 Ratings

Owner's of the Celestron Microscope & Magnifier LCD DIgital Microscope gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 40
 
Care, Maintenance, and Warranty
Your Celestron microscope is a precision optical instrument and should be treated with care at all times. Follow these care
and maintenance suggestions and your microscope will need very little maintenance throughout its lifetime.
When you are done using your microscope, remove any specimens left on the stage.
Turn off the illuminator switch.
Turn off the LCD monitor.
Unplug the power cord.
Always place the dust cover over the microscope when not in use or when being stored.
Store the microscope in a dry and clean place.
Be very careful if using your microscope in direct sun light to prevent damage to the microscope or your eyes.
When moving your telescope, carry it by the “arm” with one hand and not by the focuser knob, LCD monitor, etc.
Then, put your other hand under the base for support.
Clean the outside surfaces (metal and plastics) with a moist cloth.
Always unplug any cords before cleaning.
Never clean optical surfaces with cloth or paper towels as they can scratch optical surfaces easily.
Blow off dust with a camel’s hair brush or an air blower from optical surfaces.
To clean fingerprints off of optical surfaces, use a lens cleaning agent and lens tissue available at most photo
outlets and when cleaning do not rub in circles as this may cause sleeks or scratches to occur.
Never disassemble or clean internal optical surfaces. This should be done by qualified technicians at the factory or
other authorized repair facilities.
When handling glass specimen slides, use care as the edges can be sharp.
Warranty
Your microscope has a two year limited warranty. Please see the Celestron website for detailed information on all
Celestron microscopes at www.celestron.com
.
EEC: This product complies with EEC guidelines in EN61558-2-6:1997 and EN61558-1:1997+A1
FCC Statement
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
RoHS
2835 Columbia St.
Torrance, California 90503 U.S.A.
www.celestron.com
Printed in China 01-08