Brother All in One Printer MFC-8220 User Manual

4.1

Out of 8 Ratings

Owner's of the Brother All in One Printer MFC-8220 gave it a score of 4.1 out of 5. Here's how the scores stacked up:

  • Reliability

    4.0 out of 5

  • Durability

    4.14 out of 5

  • Maintenance

    4.12 out of 5

  • Performance

    4.0 out of 5

  • Ease of Use

    4.0 out of 5
of 203
 
12 - 25 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Caution
If the blue tab is not at Home position (
▼
), printed pages may have
vertical stripes.
3
Reinstall the drum unit and toner cartridge assembly into the
MFC. (See
Replacing the drum unit
on page 12-30.)
4
Close the front cover.
5
Plug in the power cord
first
, then the telephone cord.
Replacing the toner cartridge
The MFC can print
up to
6,700 pages using a
high yield
toner
cartridge (TN-3060). When the toner cartridge is running low, the
LCD shows
Toner Low
. The MFC is supplied with a standard toner
cartridge (TN-3030) that must be replaced after approximately 3,500
pages. Actual page count will vary depending on your average type
of original document (i.e., standard letter, detailed graphics).
Discard the used toner cartridge according to local regulations,
keeping it separate from domestic waste. Be sure to seal the toner
cartridge tightly so toner powder does not spill out of the cartridge. If
you have questions, call your local waste disposal office.
We recommend that you clean the MFC when you replace the toner
cartridge.
It is a good idea to keep a new toner cartridge ready for use
when you see the
Toner Low
warning.

   Find Your Products By Category