0

Out of 0 Ratings

Owner's of the Audiovox Car Stereo System Audiovox Car Stereo System gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 17
 
Installation
Basics
Note:
Before installation, your
PIA
must have
the
proper radio model
protocol downloaded.
Please
see
an authorized dealer for
programming
of
your
PIA.
When choosing a location
to
mount
the components, care must be taken
not
to
interfere
with
any
of
the
vehicles existing systems. Good installation prac-
tices should be observed when
mounting
components
to
avoid any vibration,
movement
or
rattling after installation. When routing
the
cables avoid blocked
passages and any obstructions that could kink, crimp, twist, or chafe the cables.
Components should be secured in place
with
methods such
as
Velcro, double
stick foam tape, screws and nuts, cable ties etc. All
mounting
hardware and
methods are
at
the
discretion
of
the
installer.
Cables should also be secured in place
to
avoid movement.
Care
should be taken
not
to
crimp any
of
the
cables when installing them. And special care should
be taken
not
to
route cables on
or
near sharp edges
that
could eventually
cut
into
the jacket
of
the
cable.
I.nstallation
Planning
The
PIA
should
be
located
within
2-3 feet
of
the radio
due
to
the
cable lengths.
The antenna should be located in an
area
to
insure
the
cable will reach the tuner
location. Check this
prior
to
installation.
Prior
to
installation, locate
the
area where
the
XM Direct 2 Tuner shall be in-
stalled. Typical locations are the glove box
or
the
center console.
Antenna
!nstal!atio[f
1.
Best reception
is
achieved
with
the antenna
mounted
on
the
metal
surface
of
the
vehicle
roofin
the center
of
an area
with
at least 12"x 12"
of
surface area and a
minimum
of
6"from a
window
or
sun roof.