4.4

Out of 3 Ratings

Owner's of the AT&T Cordless Telephone CL81301 gave it a score of 4.4 out of 5. Here's how the scores stacked up:
  • Reliability

    4.0 out of 5
  • Durability

    4.67 out of 5
  • Maintenance

    4.67 out of 5
  • Performance

    4.67 out of 5
  • Ease of Use

    4.0 out of 5
of 33
 
Registration and deregistration
Deregistering handsets
You may need to deregister your handsets if:
You have 12 registered handsets and need to replace a handset.
-OR-
You wish to change the designated handset number of your
registered handsets.
You must first deregister ALL the handsets, and then register each
handset you wish to use again, one at a time.
Please read carefully through all the instructions on this page
before beginning the deregistration process.
Deregister all handsets from your telephone base
1. Press and hold /HANDSET LOCATOR on the
telephone base until the IN USE light starts to
flash (about 10 seconds), then release the
/HANDSET LOCATOR button.
2. Immediately press /HANDSET LOCATOR again
while the IN USE light is still flashing. (The light flashes for about
seven seconds. If the light stops flashing, pick up the handset and
place it back into the telephone base, then start again with Step 1 above.)
3. It takes up to 10 seconds to complete deregistration. Wait for the
cordless handset screen to display Put HS on BASE to register.
4. To register the handset(s) to the telephone base again, follow the
instructions on page 8.
After you deregister the handset(s), the system’s date and time
need to be reset. For instructions, see Set date/time in the
telephone system user’s manual for details. To skip setting the
date and time, press OFF/CANCEL.
NOTES:
If the deregistration process is not successful, you might need to reset the system
and try again. To reset, unplug the power from the telephone base and plug it back in.
You cannot deregister the handset(s) if any other system handset is in use.
Even if the battery is depleted, you can still deregister the handset by following the
steps above. After the handset is charged for at least 10 minutes, the screen shows
Put HS on BASE to register.
9