0

Out of 0 Ratings

Owner's of the Atdec TV Mount Atdec TV Mount gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 2
 
Installation Instructions
TH-1026-VTP
Component Checklist
Flat Screen Wall Mount | Tilt
Security
Screw (x2)
Spanner
M6 Coach
Bolt (x4)
S8 Nylon
Anchor (x4)
HARDWARE
Display Mounting
Screws (x4 each)
M4x10mm/16mm
M6x10mm/16mm
Tools Required:
• Power Drill
• 4mm(0.15”) Drill Bit
• 8mm(0.3”) Masonry Drill Bit
• Phillips head screw driver
• 17mm(0.7”) Socket Wrench or Shifter
! IMPORTANT - Install Telehook Flat Screen Wall Mount as per installation instruction.
! This product supports a maximum load of 15kg (33lbs.).
! This product support VESA Mounting Hole Configuratons: 75x75mm and 100x100mm.
Also supports 200x100mm via additional adaptor plate AC-AP-2010 (sold separately).
! The manufacturer accepts no responsibility for incorrect installation.
IMPORTANT INFORMATION:
Step 1. Check Components
Check you have received against the component checklist and hardware above.
M4/M6 Washer
(x4 each)
TH-1026-VTP
(fully assembled)
Step 2. Hardware to Masonary Wall
Timber StudMasonry Wall
3-5mm
Clearance
WALL
Coach Bolt
Coach Bolt
Nylon Anchor
Step 3b. Attach Wall Plate to Timber Wall
Ø4mm x 50mm deep
Drilled Hole
Ø8mm x 50mm deep
Drilled Hole
A. Attach TH-1026-VTP Wall Plate to the wall. B. Tighten the two coach bolts using the supplied spanner.
Supplied Spanner
TIGHTEN
OR
Step 3a. Hardware to Timber Wall
Tip: Use the TH-1026-VTP Wall Plate as a drilling template.
NOTE: Use a stud finder to accurately
locate the center of the stud. Ensure
that all screws fix securely into the stud.